Find a Service Center
Alternate Products
- Single Row Radial Bearing, 0.875" ID x 2.04724" OD x 1" Wide, Hex Bore, Double Sealed (Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- This series is designed to be used either for outer or inner ring rotation in low speed, moderatly loaded applications, primarily in agricultural implements and conveyors. The main advantage of these bearings is ease of mounting
- except for end-wise positioning by adjacent parts, no collars, setscrews or other locking devices are required to lock the inner ring to the hex shaft. The tolerances of the hex bore in this series are suitable for mounting on cold rolled hex shafting. These bearings utilize the R type shroud seal.
| Ball Dia. | 0.313 in |
| Radial Internal Clearance | C3 |
| Bore Type | Hex Bore |
| Cage Type | Metal |
| Precision Level | Standard (ABEC 1) |
| Temperature Range [Min] | -30 °F |
| Lubricant | Polyurea Base |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| No. in Set | Single Bearing |
| O.D. | 2.04724 in |
| Preload Level | None |
| No. of Balls | 9 |
| Precision | Standard |
| Inner Ring Width | 1 in |
| Locking Device | No Locking Device |
| O.D. Type | Straight |
| Capacity | Standard Capacity |
| Temperature Range [Max] | 275 °F |
| Snap Ring | No Snap Ring |
| Outer Ring Width | 0.591 in |
| Ball Material | Steel |
| Cage Material | Steel |
| Material | Steel |
| Contact Angle | 0° |
| Dynamic Load Rating | 3450 lbf |
| Seal Type | Contact Seals |
| I.D. | 7/8 in |
| Rows of Balls | Single |
| Origin | Wide Inner Ring |
| Enclosure | Double Sealed |
| Inch/Metric | Inch Bore |
| Seal Material | Rubber |
| Bearing Type | Radial |
| Static Load Rating [Max] | 1560 lbf |
| Weight | 0.41 LB |
| EAN or UPC | 87796045965 |
