Find a Service Center
Alternate Products
- Single Row Radial Bearing, 0.876" ID x 2.04724" OD x 1" Wide, Hex Bore, Double Sealed (Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3), Self-Aligning OD
description
- This series is designed to be used either for outer or inner ring rotation in low speed, moderatly loaded applications, primarily in agricultural implements and conveyors. The main advantage of these bearings is ease of mounting
- except for end-wise positioning by adjacent parts, no collars, setscrews or other locking devices are required to lock the inner ring to the hex shaft. The tolerances of the hex bore in this series are suitable for mounting on cold rolled hex shafting. These bearings utilize the R type shroud seal.
| Precision | Standard |
| Cage Type | Metal |
| Capacity | Standard Capacity |
| O.D. | 2.04724 in |
| Ball Dia. | 0.313 in |
| Seal Material | Rubber |
| Inch/Metric | Inch Bore |
| Dynamic Load Rating | 3450 lbf |
| Temperature Range [Min] | -30 °F |
| No. in Set | Single Bearing |
| Rows of Balls | Single |
| Material | Steel |
| Contact Angle | 0° |
| I.D. | 7/8 in |
| Preload Level | None |
| Lubricant | Polyurea Base |
| Inner Ring Width | 1 in |
| Temperature Range [Max] | 275 °F |
| Ball Material | Steel |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Bore Type | Hex Bore |
| Snap Ring | No Snap Ring |
| No. of Balls | 9 |
| Cage Material | Steel |
| O.D. Type | Spherical |
| Outer Ring Width | 0.591 in |
| Seal Type | Contact Seals |
| Precision Level | Standard (ABEC 1) |
| Bearing Type | Radial |
| Origin | Wide Inner Ring |
| Enclosure | Double Sealed |
| Static Load Rating [Max] | 1560 lbf |
| Locking Device | No Locking Device |
| Radial Internal Clearance | C3 |
| Weight | 0.441 LB |
| EAN or UPC | 87796045972 |
