Find a Service Center
Alternate Products
MRC Bearing Service
7208PJDU
Single Row Cylindrical Bore Angular Contact Ball Bearing
Item #102142486
- 1.575 in Inner Diameter
- 3.149 in Outer Diameter
- Single Row
- 0.709 in Overall Width
- Cylindrical OD
description
- The angular contact light 7200WN series is dimensionally interchangeable with the radial 200 series.The features of the 7000WN series include a refined bore diameter. A single bearing is recommended for applications in which the thrust load is in one direction or, in the case of combined loads, the thrust load is high in relation to the radial load. A duplex pair is recommended for application where thrust ispresent in both directions or where axialdisplacement of the shaft must be restricted.For exceptionally high thrust loads in one direction, a tandem pair can be utilized opposed by a third bearing. Sizes 7201K through 7203WN have a 20° contact angle and a nylon cage. Sizes 7204WN through 7218WN have a 40° contact angle and a one-piece, ball piloted, pressed brass cage.Larger sizes 7219WN through 7230WN have a 40° contact angle and a one-piece, outer ring piloted high-strength machined bronze cage.
applications
- General industrial
- Agricultural
- Chemical
- Utilities
features
- 40 degree contact angle for heavy thrust load capacity
- One-piece, ball-piloted, pressed brass cage
- Maximum capacity angular contact ball bearing
- Enhanced raceway finish for quiet running
- Refined bore diameter tolerance for longer bearing life
- High-speed capabilities
- Dimensionally interchangeable with 200 series deep groove ball bearings
| Origin | Single Row Angular Contact |
| Precision Level | Standard (ABEC 1) |
| Locking Device | No Locking Device |
| Seal Type | Unsealed |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| No. of Rows | 1 |
| Internal Design | Universal Mounting |
| Enclosure | Open |
| Contact Angle | 40° |
| Outer Ring Width | 18 mm |
| Material | Steel |
| Seal Material | None |
| Cage Type | Metal |
| No. in Set | Single Bearing |
| Static Load Rating [Max] | 5200 lbf |
| Bearing Material | Steel |
| O.D. Type | Straight |
| Relubricatable | No |
| Fillet Radius Cone | 0.043 in, 1.09 mm |
| Dynamic Load Rating | 8150 lbf |
| Snap Ring | No Snap Ring |
| O.D. | 80 mm |
| Inner Ring Width | 18 mm |
| Closure Type | Open |
| Precision | Standard |
| Rows of Balls | Single |
| Bore Type | Round Bore |
| Universally (Flush) Ground | Yes |
| Inch/Metric | Metric Bore |
| Filling Slot | No |
| Precision Class | ISO P0 |
| Cage Material | Brass/Bronze |
| Capacity | Standard Capacity |
| icNumber | 7695814 |
| Lubricant | Oil Preservative |
| I.D. | 40 mm |
| Overall Width | 0.709 in, 18 mm |
| Rolling Element Material | Steel |
| Preload Level | None |
| Radial Internal Clearance | C3 |
| Bearing Type | Angular Contact |
| Rolling Element | Ball |
| Ball Material | Steel |
| Fillet Radius | 0.039 in |
| Weight | 0.97 LB |
| EAN or UPC | 87796044029 |
