Find a Service Center
Alternate Products
MRC Bearing Service
7209PJDU
Single Row Cylindrical Bore Angular Contact Ball Bearing
Item #102142803
- 1.771 in Inner Diameter
- 3.347 in Outer Diameter
- Single Row
- 0.748 in Overall Width
- Cylindrical OD
description
- The angular contact light 7200WN series is dimensionally interchangeable with the radial 200 series.The features of the 7000WN series include a refined bore diameter. A single bearing is recommended for applications in which the thrust load is in one direction or, in the case of combined loads, the thrust load is high in relation to the radial load. A duplex pair is recommended for application where thrust ispresent in both directions or where axialdisplacement of the shaft must be restricted.For exceptionally high thrust loads in one direction, a tandem pair can be utilized opposed by a third bearing. Sizes 7201K through 7203WN have a 20° contact angle and a nylon cage. Sizes 7204WN through 7218WN have a 40° contact angle and a one-piece, ball piloted, pressed brass cage.Larger sizes 7219WN through 7230WN have a 40° contact angle and a one-piece, outer ring piloted high-strength machined bronze cage.
applications
- General industrial
- Agricultural
- Chemical
- Utilities
features
- 40 degree contact angle for heavy thrust load capacity
- One-piece, ball-piloted, pressed brass cage
- Maximum capacity angular contact ball bearing
- Enhanced raceway finish for quiet running
- Refined bore diameter tolerance for longer bearing life
- High-speed capabilities
- Dimensionally interchangeable with 200 series deep groove ball bearings
| Ball Material | Steel |
| Snap Ring | No Snap Ring |
| Precision | Standard |
| Closure Type | Open |
| Precision Class | ISO P0 |
| Cage Type | Metal |
| Radial Internal Clearance | C3 |
| Bearing Type | Angular Contact |
| I.D. | 45 mm |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Rolling Element | Ball |
| Dynamic Load Rating | 9150 lbf |
| icNumber | 7695829 |
| Lubricant | Oil Preservative |
| Seal Material | None |
| Fillet Radius | 0.039 in |
| Locking Device | No Locking Device |
| No. in Set | Single Bearing |
| Outer Ring Width | 19 mm |
| Rolling Element Material | Steel |
| Seal Type | Unsealed |
| Cage Material | Brass/Bronze |
| Bearing Material | Steel |
| O.D. | 85 mm |
| Overall Width | 0.748 in, 19 mm |
| Material | Steel |
| Bore Type | Round Bore |
| Rows of Balls | Single |
| No. of Rows | 1 |
| Relubricatable | No |
| Inch/Metric | Metric Bore |
| Static Load Rating [Max] | 5850 lbf |
| Origin | Single Row Angular Contact |
| Internal Design | Universal Mounting |
| Preload Level | None |
| Precision Level | Standard (ABEC 1) |
| O.D. Type | Straight |
| Filling Slot | No |
| Capacity | Standard Capacity |
| Fillet Radius Cone | 0.043 in, 1.09 mm |
| Universally (Flush) Ground | Yes |
| Inner Ring Width | 19 mm |
| Enclosure | Open |
| Contact Angle | 40° |
| Weight | 0.0 LB |
| EAN or UPC | 87796044043 |
