Find a Service Center
Alternate Products
MRC Bearing Service
7210PJDU
Single Row Cylindrical Bore Angular Contact Ball Bearing
Item #102167861
- 1.969 in Inner Diameter
- 3.543 in Outer Diameter
- Single Row
- 0.787 in Overall Width
- Cylindrical OD
description
- The angular contact light 7200WN series is dimensionally interchangeable with the radial 200 series.The features of the 7000WN series include a refined bore diameter. A single bearing is recommended for applications in which the thrust load is in one direction or, in the case of combined loads, the thrust load is high in relation to the radial load. A duplex pair is recommended for application where thrust ispresent in both directions or where axialdisplacement of the shaft must be restricted.For exceptionally high thrust loads in one direction, a tandem pair can be utilized opposed by a third bearing. Sizes 7201K through 7203WN have a 20° contact angle and a nylon cage. Sizes 7204WN through 7218WN have a 40° contact angle and a one-piece, ball piloted, pressed brass cage.Larger sizes 7219WN through 7230WN have a 40° contact angle and a one-piece, outer ring piloted high-strength machined bronze cage.
applications
- General industrial
- Agricultural
- Chemical
- Utilities
features
- 40 degree contact angle for heavy thrust load capacity
- One-piece, ball-piloted, pressed brass cage
- Maximum capacity angular contact ball bearing
- Enhanced raceway finish for quiet running
- Refined bore diameter tolerance for longer bearing life
- High-speed capabilities
- Dimensionally interchangeable with 200 series deep groove ball bearings
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Capacity | Standard Capacity |
| Lubricant | Oil Preservative |
| Universally (Flush) Ground | Yes |
| Bearing Type | Angular Contact |
| Fillet Radius | 0.039 in |
| Cage Type | Metal |
| Precision | Standard |
| Ball Material | Steel |
| Dynamic Load Rating | 9500 lbf |
| Rolling Element | Ball |
| Rows of Balls | Single |
| Filling Slot | No |
| I.D. | 50 mm |
| Precision Level | Standard (ABEC 1) |
| Snap Ring | No Snap Ring |
| Locking Device | No Locking Device |
| O.D. | 90 mm |
| No. in Set | Single Bearing |
| Inner Ring Width | 20 mm |
| Material | Steel |
| Precision Class | ISO P0 |
| Contact Angle | 40° |
| No. of Rows | 1 |
| Rolling Element Material | Steel |
| Radial Internal Clearance | C3 |
| Static Load Rating [Max] | 6400 lbf |
| Origin | Single Row Angular Contact |
| Outer Ring Width | 20 mm |
| Relubricatable | No |
| Fillet Radius Cone | 0.043 in, 1.09 mm |
| Internal Design | Universal Mounting |
| Closure Type | Open |
| Seal Material | None |
| Bearing Material | Steel |
| icNumber | 7695824 |
| Overall Width | 0.787 in, 20 mm |
| O.D. Type | Straight |
| Seal Type | Unsealed |
| Inch/Metric | Metric Bore |
| Cage Material | Brass/Bronze |
| Preload Level | None |
| Enclosure | Open |
| Bore Type | Round Bore |
| Weight | 0.0 LB |
| EAN or UPC | 87796044067 |
