Find a Service Center
Alternate Products
- 1.4375" Shaft, 2.75" Base to Center, Labyrinth Seals, Eccentric Collar, Non-Expansion Type
description
- Fafnir RSAO and LSAO type pillow blocks are equipped with GN-KRRB wide inner ring ball bearings, and the LSA series is equipped with GN-KLLB wide inner ring bearings. They are ideally suited for installations where the load is heavy inproportion to the shaft diameter or where considerable shock loads exist. These pillow blocks are prelubricated and ready for immediate use. For wet or extremely dirty conditions, a grease fitting is provided for relubrication if required. All units are supplied with a self-locking collar.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Housing Construction | 1 Piece |
| Base Width | 2 3/4 in |
| Bolt Size | 5/8 in |
| Locking Device | Eccentric Locking Collar |
| Length Through Bore | 2.03125 in |
| Insert Type | Steel Insert |
| Bearing Design | Non-Expansion |
| Series | LSAO Series |
| Housing Width | 3 3/8 in |
| Pillow Block Type | Thru-Bolt |
| Bearing Type | Ball Bearing |
| Shaft Dia. | 1.4375 in |
| Lubrication | Relubricatable |
| Bolt Hole Spacing | 8 1/4 in |
| Bolt Hole Length | 3/4 in |
| Base Length | 10 5/8 in |
| Inch/Metric | Inch Bore |
| End Type | Open End |
| Housing Height | 4 13/16 in |
| Collar O.D. | 2 3/16 in |
| Overall Width | 2 3/4 in |
| Bolt Holes | 2 |
| Temperature Range [Max] | 350 °F |
| Seal Type | Labyrinth Seals |
| Mounted Unit Duty | Heavy-Duty |
| Base Height | 15/16 in |
| Bearing Insert | GN107KRRB |
| Collar No. | SN107K |
| Bolt Hole Width | 1 1/8 in |
| Housing Material | Cast Iron |
| Weight | 9.578 LB |
| EAN or UPC | 87796059139 |
