Find a Service Center
Alternate Products
- 1.4375" Shaft, 2.75" Base to Center, Cast Iron Housing, 2-Bolt Pillow Block, Contact Seals, Eccentric Collar
description
- Fafnir RSAO and LSAO type pillow blocks are equipped with GN-KRRB wide inner ring ball bearings, and the LSA series is equipped with GN-KLLB wide inner ring bearings. They are ideally suited for installations where the load is heavy inproportion to the shaft diameter or where considerable shock loads exist. These pillow blocks are prelubricated and ready for immediate use. For wet or extremely dirty conditions, a grease fitting is provided for relubrication if required. All units are supplied with a self-locking collar.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Pillow Block Type | Thru-Bolt |
| Shaft Dia. | 1.4375 in |
| Bolt Hole Spacing | 8 1/4 in |
| Bearing Insert | GN107KRRB |
| Locking Device | Eccentric Locking Collar |
| Housing Construction | 1 Piece |
| Bolt Hole Length | 1 1/8 in |
| Bolt Holes | 2 |
| Lubrication | Relubricatable |
| End Type | Open End |
| Bearing Type | Ball Bearing |
| Bolt Hole Width | 3/4 in |
| Housing Material | Cast Iron |
| Insert Type | Steel Insert |
| Base Width | 2 3/4 in |
| Mounted Unit Duty | Heavy-Duty |
| Base Height | 15/16 in |
| Collar No. | SN107K |
| Base Length | 10 5/8 in |
| Bearing Design | Non-Expansion |
| Seal Type | Contact Seals |
| Inch/Metric | Inch Bore |
| Weight | 5.0 LB |
| EAN or UPC | 87796059290 |
