Find a Service Center
Alternate Products
- 2.4375" Shaft, 4.125" Base to Center, Cast Iron Housing, 2-Bolt Pillow Block, Contact Seals, Eccentric Collar
description
- Fafnir RSAO and LSAO type pillow blocks are equipped with GN-KRRB wide inner ring ball bearings, and the LSA series is equipped with GN-KLLB wide inner ring bearings. They are ideally suited for installations where the load is heavy inproportion to the shaft diameter or where considerable shock loads exist. These pillow blocks are prelubricated and ready for immediate use. For wet or extremely dirty conditions, a grease fitting is provided for relubrication if required. All units are supplied with a self-locking collar.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Insert Type | Steel Insert |
| Bearing Type | Ball Bearing |
| Base Length | 13 3/4 in |
| Collar No. | SN207K |
| Housing Material | Cast Iron |
| Shaft Dia. | 2.4375 in |
| Lubrication | Relubricatable |
| Housing Construction | 1 Piece |
| Seal Type | Contact Seals |
| Bearing Design | Non-Expansion |
| Locking Device | Eccentric Locking Collar |
| Base Width | 4 in |
| Bolt Hole Length | 1 3/8 in |
| Inch/Metric | Inch Bore |
| Bearing Insert | GN207KRRB |
| Base Height | 1 1/2 in |
| Bolt Hole Spacing | 11 1/4 in |
| Bolt Hole Width | 7/8 in |
| Mounted Unit Duty | Heavy-Duty |
| Bolt Holes | 2 |
| End Type | Open End |
| Pillow Block Type | Thru-Bolt |
| Weight | 28.25 LB |
| EAN or UPC | 87796061682 |
