- 2.165 in Inner Diameter
- 3.937 in Outer Diameter
- Single Row
- 0.827 in Overall Width
- Cylindrical OD
description
- The angular contact light 7200WN series is dimensionally interchangeable with the radial 200 series.The features of the 7000WN series include a refined bore diameter. A single bearing is recommended for applications in which the thrust load is in one direction or, in the case of combined loads, the thrust load is high in relation to the radial load. A duplex pair is recommended for application where thrust ispresent in both directions or where axialdisplacement of the shaft must be restricted.For exceptionally high thrust loads in one direction, a tandem pair can be utilized opposed by a third bearing. Sizes 7201K through 7203WN have a 20° contact angle and a nylon cage. Sizes 7204WN through 7218WN have a 40° contact angle and a one-piece, ball piloted, pressed brass cage.Larger sizes 7219WN through 7230WN have a 40° contact angle and a one-piece, outer ring piloted high-strength machined bronze cage.
features
- 40 degree contact angle for heavy thrust load capacity
- One-piece, ball-piloted, pressed brass cage
- Maximum capacity angular contact ball bearing
- Enhanced raceway finish for quiet running
- Refined bore diameter tolerance for longer bearing life
- High-speed capabilities
- Dimensionally interchangeable with 200 series deep groove ball bearings
| icNumber | 7695855 |
| Snap Ring | No Snap Ring |
| Inch/Metric | Metric Bore |
| Bearing Material | Steel |
| No. in Set | Single Bearing |
| O.D. Type | Straight |
| Capacity | Standard Capacity |
| Cage Type | Metal |
| Inner Ring Width | 21 mm |
| Material | Steel |
| Precision Class | ISO P0 |
| Contact Angle | 40° |
| Outer Ring Width | 21 mm |
| Rolling Element | Ball |
| Fillet Radius Cone | 0.059 in, 1.5 mm |
| Origin | Single Row Angular Contact |
| Bearing Type | Angular Contact |
| Lubricant | Oil Preservative |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Precision Level | Standard (ABEC 1) |
| Overall Width | 0.827 in, 21 mm |
| Preload Level | None |
| Internal Design | Universal Mounting |
| Relubricatable | No |
| O.D. | 100 mm |
| Fillet Radius | 0.059 in |
| Rows of Balls | Single |
| Dynamic Load Rating | 11800 lbf |
| I.D. | 55 mm |
| Locking Device | No Locking Device |
| Seal Material | None |
| Ball Material | Steel |
| Rolling Element Material | Steel |
| Precision | Standard |
| Enclosure | Open |
| Bore Type | Round Bore |
| Filling Slot | No |
| Radial Internal Clearance | C3 |
| Universally (Flush) Ground | Yes |
| No. of Rows | 1 |
| Cage Material | Brass/Bronze |
| Closure Type | Open |
| Seal Type | Unsealed |
| Static Load Rating [Max] | 8150 lbf |
| Weight | 1.487 LB |
| EAN or UPC | 87796151291 |

