Find a Service Center
Alternate Products
MRC Bearing Service
7211PJDU
Single Row Cylindrical Bore Angular Contact Ball Bearing
Item #102137943
- 2.165 in Inner Diameter
- 3.937 in Outer Diameter
- Single Row
- 0.827 in Overall Width
- Cylindrical OD
description
- The angular contact light 7200WN series is dimensionally interchangeable with the radial 200 series.The features of the 7000WN series include a refined bore diameter. A single bearing is recommended for applications in which the thrust load is in one direction or, in the case of combined loads, the thrust load is high in relation to the radial load. A duplex pair is recommended for application where thrust ispresent in both directions or where axialdisplacement of the shaft must be restricted.For exceptionally high thrust loads in one direction, a tandem pair can be utilized opposed by a third bearing. Sizes 7201K through 7203WN have a 20° contact angle and a nylon cage. Sizes 7204WN through 7218WN have a 40° contact angle and a one-piece, ball piloted, pressed brass cage.Larger sizes 7219WN through 7230WN have a 40° contact angle and a one-piece, outer ring piloted high-strength machined bronze cage.
applications
- General industrial
- Agricultural
- Chemical
- Utilities
features
- 40 degree contact angle for heavy thrust load capacity
- Enhanced raceway finish for quiet running
- Refined bore diameter tolerance for longer bearing life
- High-speed capabilities
- Dimensionally interchangeable with 200 series deep groove ball bearings
- One-piece, ball-piloted, pressed brass cage
- Maximum capacity angular contact ball bearing
| Relubricatable | No |
| icNumber | 7695855 |
| Inner Ring Width | 21 mm |
| Radial Internal Clearance | C3 |
| Inch/Metric | Metric Bore |
| Lubricant | Oil Preservative |
| Static Load Rating [Max] | 8150 lbf |
| Closure Type | Open |
| Universally (Flush) Ground | Yes |
| Rolling Element | Ball |
| Precision Class | ISO P0 |
| Bore Type | Round Bore |
| Seal Type | Unsealed |
| Bearing Material | Steel |
| O.D. Type | Straight |
| Rows of Balls | Single |
| Material | Steel |
| Precision Level | Standard (ABEC 1) |
| Contact Angle | 40° |
| Internal Design | Universal Mounting |
| Bearing Type | Angular Contact |
| Enclosure | Open |
| Fillet Radius Cone | 0.059 in, 1.5 mm |
| Dynamic Load Rating | 11800 lbf |
| Cage Type | Metal |
| Cage Material | Brass/Bronze |
| O.D. | 100 mm |
| Origin | Single Row Angular Contact |
| Capacity | Standard Capacity |
| Snap Ring | No Snap Ring |
| I.D. | 55 mm |
| No. in Set | Single Bearing |
| Ball Material | Steel |
| Overall Width | 0.827 in, 21 mm |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| No. of Rows | 1 |
| Seal Material | None |
| Preload Level | None |
| Filling Slot | No |
| Rolling Element Material | Steel |
| Precision | Standard |
| Outer Ring Width | 21 mm |
| Fillet Radius | 0.059 in |
| Locking Device | No Locking Device |
| Weight | 0.66 LB |
| EAN or UPC | 87796044081 |
