Find a Service Center
Alternate Products
MRC Bearing Service
7211PJDU
Single Row Cylindrical Bore Angular Contact Ball Bearing
Item #102137943
- 2.165 in Inner Diameter
- 3.937 in Outer Diameter
- Single Row
- 0.827 in Overall Width
- Cylindrical OD
description
- The angular contact light 7200WN series is dimensionally interchangeable with the radial 200 series.The features of the 7000WN series include a refined bore diameter. A single bearing is recommended for applications in which the thrust load is in one direction or, in the case of combined loads, the thrust load is high in relation to the radial load. A duplex pair is recommended for application where thrust ispresent in both directions or where axialdisplacement of the shaft must be restricted.For exceptionally high thrust loads in one direction, a tandem pair can be utilized opposed by a third bearing. Sizes 7201K through 7203WN have a 20° contact angle and a nylon cage. Sizes 7204WN through 7218WN have a 40° contact angle and a one-piece, ball piloted, pressed brass cage.Larger sizes 7219WN through 7230WN have a 40° contact angle and a one-piece, outer ring piloted high-strength machined bronze cage.
applications
- General industrial
- Agricultural
- Chemical
- Utilities
features
- 40 degree contact angle for heavy thrust load capacity
- One-piece, ball-piloted, pressed brass cage
- Maximum capacity angular contact ball bearing
- Enhanced raceway finish for quiet running
- Refined bore diameter tolerance for longer bearing life
- High-speed capabilities
- Dimensionally interchangeable with 200 series deep groove ball bearings
| Locking Device | No Locking Device |
| No. of Rows | 1 |
| Inch/Metric | Metric Bore |
| Cage Material | Brass/Bronze |
| Precision Level | Standard (ABEC 1) |
| Dynamic Load Rating | 11800 lbf |
| Seal Material | None |
| Snap Ring | No Snap Ring |
| Lubricant | Oil Preservative |
| Bore Type | Round Bore |
| Contact Angle | 40° |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Precision | Standard |
| Outer Ring Width | 21 mm |
| I.D. | 55 mm |
| Inner Ring Width | 21 mm |
| Rolling Element Material | Steel |
| Radial Internal Clearance | C3 |
| Filling Slot | No |
| Ball Material | Steel |
| Origin | Single Row Angular Contact |
| Overall Width | 0.827 in, 21 mm |
| O.D. Type | Straight |
| Bearing Material | Steel |
| Static Load Rating [Max] | 8150 lbf |
| Seal Type | Unsealed |
| Rolling Element | Ball |
| O.D. | 100 mm |
| Universally (Flush) Ground | No |
| Rows of Balls | Single |
| icNumber | 7695855 |
| Bearing Type | Angular Contact |
| Enclosure | Open |
| Closure Type | Open |
| Fillet Radius | 0.059 in |
| Fillet Radius Cone | 0.059 in, 1.5 mm |
| Relubricatable | No |
| Preload Level | None |
| Capacity | Standard Capacity |
| Material | Steel |
| Cage Type | Metal |
| No. in Set | Single Bearing |
| Precision Class | ISO P0 |
| Weight | 1.4 LB |
| EAN or UPC | 87796044074 |
